OCOMA DX6 is an exceptional quality fully synthetic ATF fluid designed to meet the next generation fule efficient-long life specification fluids. This product is a high viscosity index fluid containing superior additive technology, which provides outstanding service life span, shift pattern performance, clutch life, thermal stability as well as oxidation resistance and sludge control.
APPLICATION OCOMADX6 should be used where DXVI is specified and is suitable for all GM current six speed and previous four & five speed automatics.DX6 has a lower viscosity than previous DX fluids and may be used as a power steering fluid and in hydraulic systems particularly where high temperatures are encountered.
OCOMA DX6 was developed to meet the increasing demands placed on transmission fluids due to vehicle designers reducing sump volumes, increased power throughput using the same size of transmission, more aggressive electronic controlled capactiy clutch usage and reduced cooling capacity leading to higher operation temperatures. Thus DX6 is designed to perform in normal service operations up to 160,000 kms and in severe operations for 80,000 kms.
SPECIFICATIONOCOMA DX6 meets or exceeds the following specifications:
- GENERAL MOTORS DX VI
- FORD NGF
- ALLISON C-4, ALLISON 389
- MY HYDRA-MATIC TRANSMISSIONS 6L80
- MERCON SP
- TOYOTA WS
- MERCEDES BENZ NAG-2
PACKAGING 200 Litre, 20 Litre drums
TYPICAL CHARACTERISTICS CHARACTERISTICS SYNTHETIC DX6 ATF
|Kinematic viscosity at 40Â°C, mm 2/s (cSt)||30.3|
|Kinematic viscosity at 100Â°C, mm 2/s (cSt)||5.98|
|Pour point, Â°C||-43|
|Density at 15Â°C, kg/m3||0.846|
|Brookfield Viscosity at -40Â°C cP||11,977|
NOTE: Due to continual product research and development, the information contained herein is subject to change without notice.Values stated are average values only, and may vary due to manufacturing tolerances.