OCOMA DX3 is a premium quality fluid blended to meet DX III specifications, or when GM approval No. F30378 is required.This product is a high viscosity index fluid containing superior additive technology which provides exceptional thermal stability as well as oxidation resistance and sludge control.
APPLICATION OCOMA DX3 should be used wherever Dexron III is specified and is suitable for all General Motors four-speed automatic transmissions. It may also be used as a power steering fluid and in hydraulic systems particularly where high temperatures are encountered. This product is also approved for use where Allison C-4 fluid is recommended.
SPECIFICATION OCOMADX3meets or exceeds the following specifications:
- GENERAL MOTORS DX III
- NISSANMATC C
- TOYOTA T
- MAZDA M-III
- FORD MERCON
- ALLISON C-4
- CATERPILLAR TO-2
- SPERRY VICKERS HYDRAULIC PUMP SYSTEMS
- DENISON HYDRAULIC PUMP SYSTEMS
- SUNDSTRAND HYDRAULIC PUMP SYSTEMS
PACKAGING 200 Litre, 60 Litre, 20 Litre drums
TYPICAL CHARACTERISTICS CHARACTERISTICS DX3 ATF
|Kinematic viscosity at 40Â°C, mm 2/s (cSt)||34.08|
|Kinematic viscosity at 100Â°C, mm 2/s (cSt)||7.19|
|Pour point, Â°C||-45|
NOTE: Due to continual product research and development, the information contained herein is subject to change without notice.Values stated are average values only, and may vary due to manufacturing tolerances.