Super Red Tackyis ideally suited for applications in which heavy shock loading is encountered, the combination of polymers and heavy base oil viscosity makes this grease ideal. In addition, it can be used in rolling contact bearings in electrical motors, blowers, centrifugal pumps, etc., where a high quality grease is desired.
Also in rolling contact and plain sleeve bearings used under unfavourable environmental conditions involving moistures, high loads and or high temperatures, such as jaw crushers, tube mills, mining, material processing, cement and aggregate industries. The polymer ensures that the grease will stay where it is applied.
PACKAGING DATA 180Kg Drums, 20Kg Pails, Carton of 20 450gsm Cartridges
PRODUCT SPECIFICATION SUPER RED TACKY GREASE
| NLGI Grade | 2 |
| Soap Type | Lithium |
| Texture | Smooth/Tacky |
| Colour | Red |
| Worked Penetration, ASTM D-217, 60 Strokes | 265-295 |
| Dropping Point, ASTM D-2265 °C (°F) Min | 176 (350) |
| Oxidation Stability, ASTM D-942 PSI Drop | 10 Max |
| Wheel Bearing Leakage, ASTM D-1263 gms | 5 |
| Rust Test, Bearing Corrosion, ASTM D-1743 | Pass |
| Water Wash-Out, ASTM D-1264, 79.4°C | 10% Max |
| Timken OK Load, LB D-2506 | 60 Min |
| Four Ball EP Test, ASTM D-2596 | |
| Weld Point, Kg | 250 Min |
| LWI | 40 |
| Four Ball Wear, ASTM D-2266 Scar Dia. Mm, 40Kg | 0.60 |
| Base Oil Viscosity | |
| At 100°C, cSt | 26-28.5 |
| At 40°C, cSt | 390-450 |
| At 100°F SUS | 2100-2300 |
| Viscosity Index | 85 |
| Pour Point | 0 |
NOTE: Due to continual product research and development, the information contained herein is subject to change without notice.Values stated are average values only, and may vary due to manufacturing tolerances.