COMPRESSOR OILÂ are Premium Air compressor lubricants formulated from selected highly stable base stocks with a special non-hydrolysing anti-wear additive. Resulting with a product which is minimum deposit forming, has long life, protects compressor components from wear and also seperates readily from water.
PROPERTIES COMPRESSOR OIL results in longer valve cleaning intervals as aÂ result of high resistance to deposit formation, outstanding oxidation stability, low wear as a result of excellent rust protection and high film strength and long service life, up to 4,000 hours in screw type and reciprocating compressors and 2,000 hours in Hydrovane type compressors.
APPLICATIONS COMPRESSOR OIL GRADES 32, 46, 68Â are recommended for all rotary screwÂ compressors whilst COMPRESSOR OIL GRADES 100, 150 should be used in reciprocating compressors operating under severe conditions.
Hydrovane type compressors shoule use COMPRESSOR OIL GRADE 150. All grades can be used as hydraulic oil where the application calls for non-zinc type oil where there are pumps with silver plated surfaces.
STANDARD PACKAGING 200 Litre, 20 Litre drums
TYPICAL CHARACTERISTICS CHARACTERISTICS COMPRESSOR OIL
|Kinematic Viscosity at 40Â°C (cSt)||30||44||64||95||143|
|Kinematic Viscosity at 100Â°C (cSt)||5.3||6.7||8.5||10.8||14|
|Flash Point, COC, Â°C (min.)||180||199||205||210||220|
|Pour Point, Â°C||-18||-18||-18||-9||-9|
|Density at 15Â°C, kg/m3||0.87||0.87||0.87||0.87||0.87|
|Thermo-oxidative Stability C.C. Residue %||0.79||0.80||0.84||0.90||0.96|
NOTE: Due to continual product research and development, the information contained herein is subject to change without notice.Values stated are average values only, and may vary due to manufacturing tolerances