MASTERLUBE 40 DDÂ is a monograde SAE 40 oil and falls into the category of a superior performance “Series 2″ diesel automotive engine oil.
APPLICATION
MASTERLUBE 40 DD is a very low ash lubricant to ensure minimal crown land piston deposits and to prevent top ring carbon build up. Specifically this product has been formulated to take account the need for an oil while will provide excellent valve train wear protection and at the same time combat the likelihood of engine cylinders becoming “Glazed” under less severe operating conditions.
SPECIFICATION
MASTERLUBE 40 DD meets or exceeds the following specifications:
- API CF-2/SH
- MIL-L-46152C/2104D
- GM – DETROIT DIESEL
- BULLETIN 7SE270 (Revised 9185)
PROPERTIES
This product is suitable for use in Detroit Diesel 2 – Cycle engines, series 53, 71 and 92 as well as other equipment running under severe load conditions, additionally MASTTERLUBE 40 DD may also be used for other brands of diesel engines which are experiencing oil loss or poor compression.
PACKAGING DATA
200 Litre, 20 Litre drums
| CHARACTERISTICS: | MASTERLUBE 40 DD CF-2/SH |
| Density at 15°C, kg/m3 | 0.890 |
| Zinc (%wt) | 0.11 |
| Kinematic viscosity at 100°C, mm2/s (cSt) | 15.5 |
| Viscosity index | 98 |
| TBN, mgKOH/g | 7.4 |
| Sulphated ash % | 0.6 |
NOTE: Due to continual product research and development, the information contained herein is subject to change without notice.
Values stated are average values only, and may vary due to manufacturing tolerances.